Skip to content
2000
Volume 18, Issue 7
  • ISSN: 2352-0965
  • E-ISSN: 2352-0973

Abstract

Background

In this article, an IOT solution for managing and controlling a PV system with applications for the home is presented. A DC-DC SEPIC converter, a bidirectional converter, a PWM generator, and a single-phase voltage source inverter with active clamping are used for power conditioning. An output voltage control loop is implemented, and real-time online communication with an internet server is accomplished using the PIC microcontroller.

Methods

The ESP8266MOD WIFI IOT module works with the Blynk mobile app. Experimental findings showing the proper operation of IOT features demonstrate the effectiveness of voltage regulation. In this article, frequency is taken into consideration as solar power is integrated with the grid. A user may easily control the DC-DC converter, load batteries, and monitor battery voltage through our user-friendly GUI interface.

Results

In this paper, an IOT (Internet of Things) application was used to control and track the output of a modest PV power plant. The study shows the efficiency of the digitally controlled system developed to regulate the output voltage of the SEPIC DC-DC converter.

Practical Significance

They further argue that the ESP8266 and microcontroller's versatility make them an appropriate instrument for remote and real-time monitoring and control of the proposed model from around the world. The energy that is produced by the sun is added to the grid so that it may be put to effective use and contribute to satisfying the rising demand for energy. Solar energy is the input that SEPIC uses to charge the batteries and for all of its other processes. In the event that solar photovoltaic (PV) panels are not available, the SEPIC DC-DC converter will derive its energy from AC power.

Conclusion

In this article, an IOT (Internet of Things) application was used to control and track the output of a modest PV power plant. The research demonstrates the effectiveness of the digitally controlled system created to manage the output voltage of the SEPIC DC-DC converter. They further argue that the ESP8266 and microcontroller's versatility make them an appropriate instrument for allowing remote and real-time monitoring and control of the proposed model from any part of the world. The energy that is produced by the sun is added to the grid so that it may be put to effective use and contribute to satisfying the rising demand for energy. Solar energy is the input that SEPIC uses to charge the batteries and for all of its other processes. In the event that solar photovoltaic (PV) panels are not available, the SEPIC DC-DC converter will derive its energy from AC power.

Loading

Article metrics loading...

/content/journals/raeeng/10.2174/0123520965295293240418053531
2024-05-06
2025-08-14
Loading full text...

Full text loading...

References

  1. RiosE.R. Photovoltaic microgeneration connected to the electricity grid: What changed with the normative resolution No. 687 of the national electric energy agency – AneeL.Brazilian J. Solar Energy201782119122
    [Google Scholar]
  2. PurusothamanS.R.R.D. RajeshR. BajajK.K. VijayaraghavanV. Implementation of arduino-based multi-agent system for rural indian microgrids.IEEE Innovative Smart Grid Technologies-Asia.Bangalore, IndiaISGT Asia20131510.1109/ISGT‑Asia.2013.6698751
    [Google Scholar]
  3. GotoY. IshiguroT. KiyaM. MizutaniY. SakaiT. KawagoeY. "Integrated management and remote monitoring system for telecommunications power plants with fully DC-powered center equipment". INTELEC 07 - 29th International Telecommunications Energy Conference2007775780Rome, Italy10.1109/INTLEC.2007.4448887
    [Google Scholar]
  4. NkolomaM. ZennaroM. BagulaA. SM2: Solar monitoring system in malawiProceedings of ITU KaleidoscopeCape Town, South Africa201116
    [Google Scholar]
  5. DuttaS. ChatterjeeK. A buck and boost based grid connected pv inverter maximizing power yield from two pv arrays in mismatched environmental conditions.IEEE Trans. Ind. Electron.20186575561557110.1109/TIE.2017.2774768
    [Google Scholar]
  6. VeeracharyM. KhubchandaniV. Analysis, design, and control of switching capacitor based buck–boost converter.IEEE Trans. Ind. Appl.20195532845285710.1109/TIA.2018.2889848
    [Google Scholar]
  7. KabalciE. GorgunA. KabalciY. Design and implementation of a renewable energy monitoring system4th International Conference on Power Engineering, Energy and Electrical DrivesIstanbul, Turkey20131071107510.1109/PowerEng.2013.6635759
    [Google Scholar]
  8. ShwetaR. SivagnanamS. KumarK.A. Fault detection and monitoring of solar photovoltaic panels using internet of things technology with fuzzy logic controller.Elect. Eng. Electromechan20226677410.20998/2074‑272X.2022.6.10
    [Google Scholar]
  9. BalakishanP. ChidambaramI.A. ManikandanM. Improvement of power quality in grid-connected hybrid system with power monitoring and control based on internet of things approach.Elect. Eng. Electromechan20224445010.20998/2074‑272X.2022.4.06
    [Google Scholar]
  10. OsamedeA. SchoemanR. PienaarHc. Experiential analysis of the effectiveness of buck and boost dc-dc converters in a basic off grid pv systemInternational Conference on Computing, Communication and Security (ICCCS) Pointe aux Piments, Mauritius,20151610.1109/CCCS.2015.7374123
    [Google Scholar]
  11. HegazyE. SaadW. ShokairM. Studying the effect of using a low power pv and dc-dc boost converter on the performance of the solar energy pv system15th International Conference on Computer Engineering and Systems (ICCES) Cairo, Egypt20201810.1109/ICCES51560.2020.9334581
    [Google Scholar]
  12. MeherJ. GoshA. Comparative study of dc/dc bidirectional sepic converter with different controllersIEEE 8th Power India International Conference (PIICON) Kurukshetra, India20181610.1109/POWERI.2018.8704363
    [Google Scholar]
  13. MuthubalajiS. DevadasuG. SrinivasanS. SoundirarajN. Development and validation of enhanced fuzzy logic controller and boost converter topologies for a single phase grid system.Elect. Eng. Electromechan20225606610.20998/2074‑272X.2022.5.10
    [Google Scholar]
  14. AnuradhaC. ChellammalN. MaqsoodS.M. VijayalakshmiS. Design and analysis of non-isolated three-port sepic converter for integrating renewable energy sources.Energies201912222110.3390/en12020221
    [Google Scholar]
  15. PaulE. SannasyM. NaikS.V. Design of High Gain Modified SEPIC Converter for grid connected PV systems with MPPT controlIEEE IAS Global Conference on Renewable Energy and Hydrogen Technologies (GlobConHT) Male, Maldives20231510.1109/GlobConHT56829.2023.10087781
    [Google Scholar]
  16. SilvaW.N.d. BezerraL.D.S. JucáS.C.S. PereiraR.I.S. MedeirosC.M.S. Control and monitoring of a Flyback DC-DC converter for photovoltaic applications using embedded IoT system.IEEE Lat. Americ. Trans.202018111892189910.1109/TLA.2020.9398630
    [Google Scholar]
  17. PereiraR.I.S. JucáS.C.S. CarvalhoP.C.M. IoT embedded systems network and sensors signal conditioning applied to decentralized photovoltaic plants.Measurement201914219521210.1016/j.measurement.2019.04.085
    [Google Scholar]
  18. PatilS.M. VijayalashmiM. TapaskarR. IoT based solar energy monitoring systemInternational Conference on Energy, Communication, Data Analytics and Soft Computing (ICECDS) Chennai20171574157910.1109/ICECDS.2017.8389711
    [Google Scholar]
  19. VargasL.A. FuentesM. VivarM. IoT application for real- time monitoring of solar home systems based on arduino™ with 3g connectivity.IEEE Sensors J.201919267969110.1109/JSEN.2018.2876635
    [Google Scholar]
  20. HoQ.D. GaoY. NgocL.T. Challenges and research opportunities in wireless communication networks for smart grid.IEEE Wireless Commun.2013203899510.1109/MWC.2013.6549287
    [Google Scholar]
  21. WangW. XuY. KhannaM. A survey on the communication architectures in smart grid.Comput. Netw.201155153604362910.1016/j.comnet.2011.07.010
    [Google Scholar]
  22. ValentiniM. Pv inverter test setup for european efficiency, static and dynamic mppt efficiency evaluationProc. Int. Conf. Optim. Electr. Electron. Equip. BrasovRomania20081610.1109/OPTIM.2008.4602445
    [Google Scholar]
  23. RouibahN. BarazaneL. BenghanemM. MellitA. IoT‐based low‐cost prototype for online monitoring of maximum output power of domestic photovoltaic systems.ETRI J.202143345947010.4218/etrij.2019‑0537
    [Google Scholar]
  24. KolbanN. Kolban’s book on the esp32 -web siteAvailable from: https://leanpub.com/kolban-ESP32 [Online]
    [Google Scholar]
  25. SystemsE. Espressif web site ”, esp-idf programming guideAvailable at: https://docs.espressif.com/projects/esp-idf/en/latest/api-reference/index.html
    [Google Scholar]
  26. "Soft switching technique in a modified sepic converter with mppt using cuckoo search algorithm" Recent Adv. Elect. & Elect. Eng.202310.2174/0123520965263412231031060225
    [Google Scholar]
  27. HeL. ZhengZ. GuoD. High Step-Up DC–DC converter with active soft-switching and voltage-clamping for renewable energy systems.IEEE Trans. Power Electron.201833119496950510.1109/TPEL.2018.2789456
    [Google Scholar]
  28. PurushothamanS. SamiappanD. KamalkannanM. JosephN. MurugavelR. LVRT enhancement of dfig-based wecs using svpwm-based inverter control.Recent Adv. Electr. Electron. Eng.202417434535710.2174/2352096516666230606103013
    [Google Scholar]
/content/journals/raeeng/10.2174/0123520965295293240418053531
Loading
/content/journals/raeeng/10.2174/0123520965295293240418053531
Loading

Data & Media loading...


  • Article Type:
    Research Article
Keyword(s): blynk mobile application; ESP8266MOD; IoT; MPPT; PIC microcontroller; PV system; SEPIC converter
This is a required field
Please enter a valid email address
Approval was a Success
Invalid data
An Error Occurred
Approval was partially successful, following selected items could not be processed due to error
Please enter a valid_number test