Skip to content
2000
Volume 12, Issue 2
  • ISSN: 2213-3356
  • E-ISSN: 2213-3364

Abstract

Introduction/Objective

The preparation of PtNiCo/reduced graphene oxide (RGO) nanocatalysts with excellent activity and stability using a facile, microwave-assisted, and cost-effective synthetic method is crucial for the commercial application of fuel cells and clean energy technologies. This study examines the impact of varying metal ratios on the catalytic properties of PtNiCo/RGO and compares them with those of Pt/RGO.

Methods

PtNiCo/RGO nanocatalysts were synthesized a microwave-assisted hydrothermal method using ethylene glycol as the solvent. Different metal precursor ratios were used to prepare PtNiCo/RGO-1, -2, and -3. The physical and electrochemical characteristics of the synthesized catalysts were analyzed using transmission electron microscopy (TEM), X-ray diffraction (XRD), and various electrochemical tests.

Results

Among the synthesized samples, PtNiCo/RGO-3 demonstrated the best performance, with an electrochemical surface area (ECSA) of 82.61 m2/g, 2.7 times higher than that of Pt/RGO (30.39 m2/g). It also exhibited a lower CO oxidation potential and better stability during electrochemical methanol oxidation. TEM analysis confirmed a thin nanoparticle morphology with average diameters of 2–5 nm.

Discussion

The enhanced performance of PtNiCo/RGO-3 is attributed to the synergistic effects among Pt, Ni, Co, and the RGO support. These interactions improved electron transfer, dispersion, and resistance to catalyst poisoning.

Conclusion

PtNiCo/RGO-3 demonstrates excellent catalytic activity, anti-poisoning characteristics, and durability, making it a promising electrocatalyst for fuel cells and hydrogen production. This work supports the development of cost-effective and efficient clean energy technologies, aligning with the United Nations Sustainable Development Goal 7 (Affordable and Clean Energy).

Loading

Article metrics loading...

/content/journals/cmic/10.2174/0122133356405973250705115411
2025-07-16
2026-01-31
Loading full text...

Full text loading...

References

  1. ChenT.Y. HuangP.C. LiaoY.F. LiuY.T. YehT.K. LinT.L. Shell thickness effects on reconfiguration of NiO core–Pt shell anodic catalysts in a high current density direct methanol fuel cell.RSC Advances2016676726077261510.1039/C6RA17013G
    [Google Scholar]
  2. ChangJ. FengL. LiuC. XingW. HuX. Ni2P enhances the activity and durability of the Pt anode catalyst in direct methanol fuel cells.Energy Environ. Sci.201475162810.1039/c4ee00100a
    [Google Scholar]
  3. MarkovićN. RossP.N. Surface science studies of model fuel cell electrocatalysts.Surf. Sci. Rep.2002454-611722910.1016/S0167‑5729(01)00022‑X
    [Google Scholar]
  4. LiuH. NosheenF. WangX. Noble metal alloy complex nanostructures: Controllable synthesis and their electrochemical property.Chem. Soc. Rev.201544103056307810.1039/C4CS00478G 25793455
    [Google Scholar]
  5. ZhuJ. YangY. ChenL. XiaoW. LiuH. AbruñaH.D. WangD. Copper-induced formation of structurally ordered Pt–Fe–Cu ternary intermetallic electrocatalysts with tunable phase structure and improved stability.Chem. Mater.201830175987599510.1021/acs.chemmater.8b02172
    [Google Scholar]
  6. WanjalaB.N. LoukrakpamR. LuoJ. NjokiP.N. MottD. ZhongC.J. ShaoM. ProtsailoL. KawamuraT. Thermal treatment of PtNiCo electrocatalysts: Effects of nanoscale strain and structure on the activity and stability for the oxygen reduction reaction.J. Phys. Chem. C201011441175801759010.1021/jp106843k
    [Google Scholar]
  7. TanX. PrabhudevS. KohandehghanA. KarpuzovD. BottonG.A. MitlinD. Pt–Au–Co alloy electrocatalysts demonstrating enhanced activity and durability toward the oxygen reduction reaction.ACS Catal.2015531513152410.1021/cs501710b
    [Google Scholar]
  8. Ezhil VilianA.T. ChenS.M. PiramanS. The electrochemical synthesis of Pt particles on ZrO 2 –ERGO modified electrodes with high electrocatalytic performance for methanol oxidation.New J. Chem.201539295396110.1039/C4NJ01470G
    [Google Scholar]
  9. HaqueK.E. Microwave energy for mineral treatment processes—A brief review.Int. J. Miner. Process.199957112410.1016/S0301‑7516(99)00009‑5
    [Google Scholar]
  10. JonesD.A. LelyveldT.P. MavrofidisS.D. KingmanS.W. MilesN.J. Microwave heating applications in environmental engineering—a review.Resour. Conserv. Recycling2002342759010.1016/S0921‑3449(01)00088‑X
    [Google Scholar]
  11. ShihK.Y. TsengH.Y. One-step microwave-assisted synthesis of MnFe2O4/rGO nanocomposites and their electrochemical properties in supercapacitors.ACS Omega20251054473448510.1021/acsomega.4c07810
    [Google Scholar]
  12. ShihK.Y. KuanY.L. WangE.R. One-step microwave-assisted synthesis and visible-light photocatalytic activity enhancement of BiOBr/RGO nanocomposites for degradation of methylene blue.Materials20211416457710.3390/ma14164577 34443100
    [Google Scholar]
  13. ShihK.Y. YuS.C. Microwave-assisted rapid synthesis of Eu(OH)3/RGO nanocomposites and enhancement of their antibacterial activity against Escherichia coli.Materials20211514310.3390/ma15010043 35009189
    [Google Scholar]
  14. WangE.R. ShihK.Y. Facile microwave hydrothermal synthesis of ZnFe2O4/rGO nanocomposites and their ultra-fast adsorption of methylene blue dye.Materials20211418539410.3390/ma14185394 34576618
    [Google Scholar]
  15. MeyerE. MbeseJ. MutukwaD. ZingweN. Structural, morphological and electrochemical characterization of hydrothermally fabricated PdNiCo and PdNiCo-rGO alloys for use as counter electrode catalysts in DSSC.Materials20191219325610.3390/ma12193256 31590418
    [Google Scholar]
  16. JungN. ChungD.Y. RyuJ. YooS.J. SungY.E. Pt-based nanoarchitecture and catalyst design for fuel cell applications.Nano Today20149443345610.1016/j.nantod.2014.06.006
    [Google Scholar]
  17. HuangX. ZhaoZ. ChenY. ZhuE. LiM. DuanX. HuangY. A rational design of carbon-supported dispersive Pt-based octahedra as efficient oxygen reduction reaction catalysts.Energy Environ. Sci.2014792957296210.1039/C4EE01082E
    [Google Scholar]
  18. DongS. DingD. WuC. ZhouK. WangQ. LiuR. PeiW. Solid-state reaction synthesizing of intermetallic L12-(FeCoZn)Pt3 nanoparticles for efficient methanol electrooxidation.J. Alloys Compd.2025101217841610.1016/j.jallcom.2024.178416
    [Google Scholar]
  19. HongL. HaoY. YangY. YuanJ. NiuL. Synthesis of graphene-supported one-dimensional nanoporous Pt based catalysts, and their enhanced performance on methanol electro-oxidation.Nanotechnology201526404560410.1088/0957‑4484/26/4/045604 25567643
    [Google Scholar]
  20. MengC. WangX. LiZ. WuC. ChangL. LiuR. PeiW. Synthesis of FeCoNiCuPt high-entropy alloy nanoparticle electrocatalysts with various Pt contents by a solid-state reaction method.Materials Advances20245271972910.1039/D3MA00834G
    [Google Scholar]
  21. WuC. WangQ. LiZ. ChangL. WangK. PeiW. WangQ. The disorder-order transition of FeCuPt nanoparticles with various Cu content.Intermetallics202517610856110.1016/j.intermet.2024.108561
    [Google Scholar]
  22. YangD. GuJ. LiuX. HeH. WangM. WangP. ZhuY. FanQ. HuangR. Monodispersed Pt3Ni nanoparticles as a highly efficient electrocatalyst for PEMFCs.Catalysts20199758810.3390/catal9070588
    [Google Scholar]
  23. QiuX. YanX. CenK. SunD. XuL. TangY. Achieving highly electrocatalytic performance by constructing holey reduced graphene oxide hollow nanospheres sandwiched by interior and exterior platinum nanoparticles.ACS Appl. Energy Mater.2018152341234910.1021/acsaem.8b00452
    [Google Scholar]
  24. MishraA. SinghV.K. MohantyT. Coexistence of interfacial stress and charge transfer in graphene oxide-based magnetic nanocomposites.J. Mater. Sci.201752137677768710.1007/s10853‑017‑1062‑1
    [Google Scholar]
  25. RethinasabapathyM. KangS.M. HaldoraiY. JankiramanM. JonnaN. ChoeS.R. HuhY.S. NatesanB. Ternary PtRuFe nanoparticles supported N-doped graphene as an efficient bifunctional catalyst for methanol oxidation and oxygen reduction reactions.Int. J. Hydrogen Energy20174252307383074910.1016/j.ijhydene.2017.10.121
    [Google Scholar]
  26. JiaZ. WangY. QiT. Pd nanoparticles supported on Mg–Al–CO3 layered double hydroxide as an effective catalyst for methanol electro-oxidation.RSC Advances2015576621426214810.1039/C5RA10483A
    [Google Scholar]
  27. Sonia TheresG. VelayuthamG. Santhana KrishnanP. ShanthiK. Synergistic impact of Ni–Cu hybrid oxides deposited on ordered mesoporous carbon scaffolds as non-noble catalyst for methanol oxidation.J. Mater. Sci.20195421502151910.1007/s10853‑018‑2884‑1
    [Google Scholar]
  28. KumarS. KumarD. KarunanithiP. KumarS. GoswamiM. SinghA. SinghN. AlamF. SathishN. ChoudharyD. AshiqM. Self-assembled nickel anchored reduced graphene oxide hybrids: Synergistic performance of electro-catalyst for oxygen reduction reaction in non-aqueous medium.Mater. Res. Express201961212552010.1088/2053‑1591/ab5816
    [Google Scholar]
  29. SunK.G. ChungJ.S. HurS.H. Durability improvement of Pt/RGO catalysts for PEMFC by low-temperature self-catalyzed reduction.Nanoscale Res. Lett.201510125710.1186/s11671‑015‑0963‑7 26061443
    [Google Scholar]
  30. MohanR. ModakA. SchechterA. Plasma-modified FeGly/C as a Pt-free stable ORR electrocatalyst in an acid electrolyte.ACS Appl. Energy Mater.20214156457410.1021/acsaem.0c02452
    [Google Scholar]
  31. SiwalS.S. ThakurS. ZhangQ.B. ThakurV.K. Electrocatalysts for electrooxidation of direct alcohol fuel cell: Chemistry and applications.Mater. Today Chem.20191410018210.1016/j.mtchem.2019.06.004
    [Google Scholar]
  32. WahabA. IqbalN. NoorT. AshrafS. RazaM.A. AhmadA. KhanU.A. Thermally reduced mesoporous manganese MOF @reduced graphene oxide nanocomposite as bifunctional electrocatalyst for oxygen reduction and evolution.RSC Advances20201046277282774210.1039/D0RA04193A 35516955
    [Google Scholar]
/content/journals/cmic/10.2174/0122133356405973250705115411
Loading
/content/journals/cmic/10.2174/0122133356405973250705115411
Loading

Data & Media loading...

This is a required field
Please enter a valid email address
Approval was a Success
Invalid data
An Error Occurred
Approval was partially successful, following selected items could not be processed due to error
Please enter a valid_number test