Current Organic Synthesis - Volume 16, Issue 7, 2019

Background: As a matter of fact, nitrogen as a hetero atom among other atoms has had an important role in active biological compounds. Since heterocyclic molecules with nitrogen are highly demanded due to biological properties, 4-phenylurazole as a compound containing nitrogen might be important in the multicomponent reaction used in agrochemicals, and pharmaceuticals. Considering the case of fused derivatives “pyrazolourazoles” which are highly applicable because of their application for analgesic, antibacterial, anti-inflammatory and antidiabetic activities as HSP-72 induction inhibitors (I and III) and novel microtubule assembly inhibitors. It should be mentioned that spiro-pyrazole also has biological activities like cytotoxic, antimicrobial, anticonvulsant, antifungal, anticancer, anti-inflammatory, and cardiotonic activities. Objective: Urazole has been used in many heterocyclic compounds which are valuable in organic syntheses. This review disclosed the advances in the use of urazole as the starting material in the synthesis of various biologically active molecules from 2006 to 2019. Conclusion: Compounds of urazole (1,2,4-triazolidine-3,5-dione) are the most important molecules which are highly active from the biological perspective in the pharmaceuticals as well as polymers. In summary, many protocols for preparations of the urazole derivatives from various substrates in multi-component reactions have been reported from different aromatic and aliphatic groups which have had carbonyl groups in their structures. It is noted that several catalysts have been synthesized to afford applicable molecules with urazole scaffolds. In some papers, being environmentally friendly, short time reactions and high yields are highlighted in the protocols. There is a room to synthesize new catalysts and perform new reactions by manipulating urazole to produce biologically active compounds, even producing chiral urazole component as many groups of chiral urazole compounds are important from biological perspective.

Background: Flavones are one of the main subclasses of flavonoids with diverse pharmacological properties. They have been reported to possess antimalarial, antimicrobial, anti-tuberculosis, anti-allergic, antioxidant, anti-inflammatory activities, among others. Objective: The present review summarizes the recent information on the pharmacological properties of naturally occurring and synthetic flavones. Methods: Scientific publications referring to natural and synthetic flavones in relation to their biological activities were hand-searched in databases such as SciFinder, PubMed (National Library of Medicine), Science Direct, Wiley, ACS, SciELO, Springer, among others. Results: As per the literature, seventy-five natural flavones were predicted as active compounds with reference to their IC50 (<20 μg/mL) in in vitro studies. Also, synthetic flavones were found active against several diseases. Conclusion: As per the literature, flavones are important sources for the potential treatment of multifactorial diseases. However, efforts toward the development of flavone-based therapeutic agents are still needed. The appearance of new catalysts and chemical transformations is expected to provide avenues for the synthesis of unexplored flavones, leading to the discovery of flavones with new properties and biological activities.

Background: Presently, rise in the infectious diseases and subsequent development of drug resistance, is a global threat to human health. However, much efforts are being made by scientists, to develop novel antimicrobials, and also to improve the efficacy of available drugs, in order to combat the lifethreatening infections. Objective: Synthesis and characterization of azole functional polymer systems for antimicrobial applications. Materials and Methods: Poly(glycidyl methacrylate) (PGMA), was produced by free radical polymerization of the monomer, glycidyl methacrylate (GMA). Different azole functional PGMAs were produced, through chemical modification with imidazole (Im), 1H-1,2,4-triazole (Tri) and 3-amino-1,2,4-triazole (ATri), to get PGMA-Imi, PGMA-Tri and PGMA-ATri, respectively. The structure was confirmed by Fourier transform infrared spectroscopy (FT-IR), thermal properties were investigated by Thermogravimetric Analysis (TGA), and surface morphology was studied by scanning electron microscopy (SEM). Newly synthesized derivatives were further explored, for their antibacterial and anticandidal activities. Results: All the three synthesized and characterized derivatives, displayed a significant activity against the tested microorganisms. The minimum inhibitory concentration (MIC) and minimum bactericidal/fungicidal concentration (MBC/MFC), recorded against Staphylococcus aureus (S. aureus), was 0.5 &1mg/ml for PGMA-Imi, followed by PGMA-ATri & PGMA-Tri, respectively, followed by E. coli with, 1 & 2 mg/ml, 4 & 8 mg/ml, 4& 8 mg/ml, respectively, whereas the maximum MIC & MFC was recorded against C. albicans i.e., 8 & 16 mg/ml, 4 & 8 mg/ml ,4 & 8 mg/ml for PGMA-ATri, PGMA-Tri, PGMA-Imi, respectively. Conclusion: In the present work, we report on the state-of-the-art, azole functional polymer systems for antimicrobial applications. These findings suggest that the synthesized azole functional polymer films have antimicrobial properties, which could be potential candidates for coating applications in the biomedical and wastewater treatment field.

Aim and Objective: Nowadays, the design, synthesis and application of magnetically nanocomposite systems have attracted the attention of numerous scientists. The huge surface area and magnetic characteristic of nanoparticles as well as the inherent potentiality of the used metal species, makes them susceptible to have different reactivity in chemical reactions. In this context, we therefore encouraged to prepare a new design of magnetic nanocatalysts as CuFe2O4@SiO2@AAPTMS@Ni(II) and CuFe2O4@SiO2@AAPTMS@Cu(II) followed by monitoring of their catalytic activities towards reduction of nitroarenes with NaBH4. Materials and Methods: Magnetically nanoparticles of CuFe2 O4@SiO2@AAPTMS@Ni(II) and CuFe2O4@SiO2@AAPTMS@Cu(II) were prepared through a four-step procedure: i) preparation of CuFe2O4 MNPs, ii) coating of CuFe2O4 nucleus by silica-layer using tetraethyl orthosilicate (TEOS), iii) layering of CuFe2O4@SiO2 MNPs with [3-(2-aminoethylamino)propyl] trimethoxysilane (AAPTMS), and iv) the complexation of CuFe2O4@SiO2@AAPTMS MNPs with an aqueous solution of Ni(OAc)2·4H2O or Cu(OAc)2·H2O. Results: The catalytic activity of CuFe2O4@SiO2@AAPTMS@Ni(II) and the Cu(II)-analogue towards reduction of nitroarenes with NaBH4 was studied. The examinations resulted that using a molar ratio of 1:2 for ArNO2 and NaBH4 in the presence of 20 mg of nanocomposites in H2O under reflux conditions reduces various aromatic nitro compounds to arylamines in high yields. Conclusion: The immobilization of Ni(II) and Cu(II) species on silica-layered CuFe2O4 was investigated. Magnetically nanoparticles of CuFe2O4@SiO2@AAPTMS@Ni(II) and the Cu(II)-analogue showed the perfect catalytic activity towards reduction of nitroarenes with NaBH4 in H2O. All reactions were carried out within 2– 15 min to afford aniline products in high yields.

Aim and Objective: Sustainable production of fine chemicals both in industries and pharmaceuticals heavily depends on the application of solid-phase synthesis route coupled with microwave technologies due to their environmentally benign nature. In this report, a microwave-assisted esterification reaction using polymer-bound triphenylphosphine and 4,4′-dinitroazobenzene reagent system was investigated. Materials and Methods: The solvents were obtained from Merck India. Polymer-bound triphenylphosphine (~3 mmol triphenylphosphine moiety/g) was acquired from Sigma-Aldrich. The progress of the reaction was observed by thin-layer chromatography. All the reactions were performed in Milestones StartSYNTH microwave. The NMR spectra were recorded on Bruker Avance III 300, 400, and 500 MHz FT NMR Spectrometers. Using azo compound and polymer-bound triphenyl phosphine as a coupling reagent, esterification of different carboxylic acids with alcohols was performed under microwave irradiation. Results: Esterification of benzoic acid with 1-propanol under microwave irradiation gave a high yield of 92% propyl benzoate in 60 minutes only. Isolation of the ester products was relatively simple as both the byproducts polymer-bound triphenylphosphine oxide and hydrazine could be removed by simple filtration. The rates of reactions were found to be directly proportional to the pKa of the benzoic acids. Conclusion: 4,4′-Dinitroazobenzene was introduced as a novel coupling reagent, in conjugation with polymer-bound triphenylphosphine, for esterification reactions under microwave irradiation. The low moisture sensitivity of the reaction system, easy separation of the byproducts, and column chromatographyfree isolation of esters help our methods with application significance, particularly from the ‘Sustainable Chemistry’ perspective.

Aims and Objectives: 2,2’-Arylmethylene bis(3-hydroxy-5,5-dimethyl-2-cyclohexene-1-one) having four carbonyl functionalities along with their tautomeric keto-enol forms, is an important biologically active compound and important synthetic intermediate in the synthesis of xanthenes. This study was conducted in order to develop a new and concise method of synthesis of 2,2’-arylmethylene bis (3-hydroxy-5,5-dimethyl-2- cyclohexene-1-one) derivatives. Materials and Methods: TEAOH (20 mol %) was fond to be as a simple and efficient catalyst for the preparation of 2,2’-arylmethylene bis(3-hydroxy-5,5-dimethyl-2-cyclohexene-1-one) derivatives by the Knoevenagel condensation/Michael addition tandem reactions. Results: A concise and practical method was developed for one-pot synthesis of 2,2’-arylmethylene bis(3- hydroxy-5,5-dimethyl-2-cyclohexene-1-one) derivatives catalyzed by TEAOH at room temperature in various solvents. Conclusion: This strategy provides several advantages over the traditional synthetic method, and is applicable to a wide variety of aromatic and heteroaromatic aldehydes at room temperature in various solvents.

Background: Carbon-based sulfonated catalysts have several advantages but their separation by filtration is still a challenge. On the other hand, the synthesis of magnetic sulfonated carbon nanoparticle indicated that the magnetic separation could be an efficient way to separate the catalyst from the reaction mixture. Objective: In order to synthesize a separable magnetic Fe3O4@C-SO3H nanoparticle (MNPs) with high catalytic activity in organic transformation, three environmental-benign and low-cost sulfonic acidfunctionalized magnetic nanoparticle (Fe3O4@C-SO3H) were successfully synthesized. Materials and Methods: The Nano catalysts were prepared by solvothermal carbonization of Sucrose (Suc), Starch (Sta) or Cellulose (Cel) in the presence of Fe3O4 Nanoparticle and then grafting of the sulfonic groups on the surface of resulted Fe3O4@C nanoparticles in the presence of p-Toluenesulfonic. Then the Nano catalysts were characterized using XRD, FESEM and FT-IR. Results: Three Fe3O4@C-SO3H were successfully synthesized. The resulted MNPs were used for the synthesis of benzo [4, 5] imidazo[1, 2-a]-pyrimidine derivatives, 2/-aminobenzothiazolomethylnaphthols and 1-amidoalkyl-2-naphthols under solvent-free conditions in excellent yields. It was found that high catalytic activity and easy magnetic separation from the reaction mixture are important achievement with regard to the efficiency and reusability of the catalyst in synthesis. Conclusion: The MNPs were synthesized and used as an efficient catalysts for the one-pot synthesis of benzo [4, 5] imidazo[1, 2-a]-pyrimidine derivatives, 2/-aminobenzothiazolomethylnaphthols, and 1-amidoalkyl-2- naphthols under solvent-free conditions in excellent yields. High catalytic activity and easy magnetic separation from the reaction mixture are two factors for evaluating the performance of Fe3O4@C-SO3H nanoparticles in the organic transformations.

Background: Oxidative stress due to high levels of reactive organic species is the cause of the progression of inflammation in various diseases. The molecules possessing both anti-inflammatory and antioxidant activity can be the promising key to treat inflammatory diseases. Phthalimide and hydrazinecarbothioamide are anti-inflammatory and anti-oxidant pharmacophores. Objective: Molecular hybrids possessing above two pharmacophores were designed. A series of N-phenyl substituted 2-(2-(1,3-dioxoisoindolin-2-yl)acetyl)-N-phenylhydrazine-1-carbothioamide (CGS compounds) was synthesized and evaluated for biological activities. Methods: N-phthaloylglycyl hydrazide was reacted with unsubstituted/substituted phenyl isothiocyanates to yield CGS compounds. Synthesized compounds were evaluated for in vivo anti-inflammatory activity in carrageenan rat paw edema model, and in vitro anti-oxidant activity by DPPH assay. Levels of TNF-α and oxidative stress at the site of inflammation were measured. The genetic algorithm-PLS regression based QSAR model correlating the effect of N-phenyl substituent on the anti-inflammatory activity was developed. Further, the interaction of the active compound in the TNF-α binding pocket was studied by in silico docking. Results: Compound containing the 2-OCH3, 4-NO2 (CGS-5); 4-CF3 (CGS-9); 4-NO2 (CGS-3) showed significant anti-inflammatory activity (percentage inhibition of paw edema after 3 hour = 58.24, 50.38, 40.05, respectively) and potent anti-oxidant activity (IC50 =0.045, 0.998, 0.285 μg/ml, respectively). Reduced levels of TNF- α and increased levels of GSH were observed for the above three compounds. Descriptors for QSAR model identified by GA-PLS were WPSA1, Weta1unity, WDunity, SC3, VC5, MlogP, and WTPT3. The identified model was highly predictive, and value of root mean square error of prediction for internal (leave one out) and external validation was: 1.579, 1.325. Conclusion: Molecular hybrids of phthalimide and hydrazinecarbothioamide were synthesized. Some of the compounds possessed promising anti-inflammatory and anti-oxidant activities.