Estimating the Number of Passes in the Weld Deposition as a Function of the Heat Input

References

1. FeiZ. PanZ. CuiuriD. LiH. WuB. DingD. SuL. Effect of heat input on weld formation and tensile properties in keyhole mode tig welding process.Metals (Basel)2019912132710.3390/met9121327
   [Google Scholar]
2. Welding and Allied Processes - Recommendations for Joint Preparation — Part 1: Manual Metal-arc Welding, Gas-shielded Metal-arc Welding, Gas welding, TIG Welding and Beam Welding of Steels”.2nd Ed.Geneva, SwitzerlandISO Central Secretariat2023114
   [Google Scholar]
3. MahiskarG.I. ChadgeR.B. AmbadeS.P. PatilA.P. Thermo-mechanical analysis of multipass bead-on-plate welding.Prog. Mater. Sci.2014525222531
   [Google Scholar]
4. TaiwadeR.V. PatilA.P. GhugalR.D. PatreS.J. DayalR.K. Effect of welding passes on heat affected zone and tensile properties of AISI 304 stainless steel and chrome-manganese austenitic stainless steel.ISIJ Int.201353110210910.2355/isijinternational.53.102
   [Google Scholar]
5. GautamB.P. ShahiA.S. Multi-pass weld influence on the microstructure of gas tungsten arc welded Ti-6Al-4V alloy.Int. J. Adv. Eng. Sci. Appl. Math.20241613314210.1007/s12572‑023‑00346‑3
   [Google Scholar]
6. SwordJ.I. GallowayA. ToumpisA. The effect of weld heat input on the microstructure and mechanical properties of wire arc additively manufactured 15-5PH stainless steel.Int. J. Adv. Manuf. Technol.202413211-125305531410.1007/s00170‑024‑13674‑w
   [Google Scholar]
7. ToyodaM. MochizukiM. Control of mechanical properties in structural steel welds by numerical simulation of coupling among temperature, microstructure, and macro-mechanics.Sci. Technol. Adv. Mater.200451-225526610.1016/j.stam.2003.10.027
   [Google Scholar]
8. LaitilaJ.M. Effect of Forced Weld Cooling on High-strength Low Alloy Steels to Interpass Temperature PhD ThesisDoctoral Training Committee of Technology and Natural Sciences of the University of OuluActa Univ. Oul. C 774Univ. of Oulu, Finland2021193
   [Google Scholar]
9. AraújoD. B. SilvaM. O. SouzaD. TeixeiraP. R. F. “Study of Angular Distortion in Multipasses Welding 2016.XLII - Congresso Nacional de SoldagemUniv. Federal de Uberlândia, MG, Brasil, 2016, pp. 1-6.
   [Google Scholar]
10. Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding.2024Available from: https://www.academia.edu/44118522/Welding_Recommendations_for_welding_of_metallic_materials_Part_1_General_guidance_for_arc_welding
11. Arc Welding technology a correspondence course lesson III covered electrodes for welding mild steels, an introduction to mild steel covered electrodes”. ESAB welding & cutting products.2000Available from: https://www.scribd.com/document/207691532/Lesson-3
12. StenbackaN. ChoquetI. HurtigK. Review of Arc Efficiency Values for Gas Tungsten Arc Welding.IIW Commission IV-XII-SG212 Intermediate Meeting BAMBerlin, Germany, 18-20 April 2012, pp. 1212-1229.
    [Google Scholar]
13. PépeN. EgerlandS. ColegroveP. YappD. LeonhartsbergerA. ScottA. Measuring the process efficiency of controlled gas metal arc welding processes.Sci. Tech. Weld. Joini.201116541241710.1179/1362171810Y.0000000029
    [Google Scholar]
14. ChoD.W. SongW.H. ChoM.H. NaS.J. Analysis of submerged arc welding process by three-dimensional computational fluid dynamics simulations.J. Mater. Process. Technol.2013213122278229110.1016/j.jmatprotec.2013.06.017
    [Google Scholar]
15. EN 1011-2 + A1 “Welding — Recommendations for welding of metallic materials — Part 2: Arc welding of ferritic steels.2024Available from: https://standards.iteh.ai/catalog/standards/cen/0e536770-f9e2-41a5-a2e1-144c7e88a1f3/en-1011-2-2001?srsltid=AfmBOorMPDKH7SPFRrAECb5frnHdC0QvkF_TGIS6z102kM-FfNdJ7sBj