Current Drug Delivery - Volume 17, Issue 2, 2020

Fast progress in nanoscience and nanotechnology has contributed to the way in which people diagnose, combat, and overcome various diseases differently from the conventional methods. Metal nanoparticles, mainly silver and gold nanoparticles (AgNPs and AuNPs, respectively), are currently developed for many applications in the medical and pharmaceutical area including as antibacterial, antibiofilm as well as anti-leshmanial agents, drug delivery systems, diagnostics tools, as well as being included in personal care products and cosmetics. In this review, the preparation of AgNPs and AuNPs using different methods is discussed, particularly the green or bio- synthesis method as well as common methods used for their physical and chemical characterization. In addition, the mechanisms of the antimicrobial and anti-biofilm activity of AgNPs and AuNPs are discussed, along with the toxicity of both nanoparticles. The review will provide insight into the potential of biosynthesized AgNPs and AuNPs as antimicrobial nanomaterial agents for future use.

Background: Nucleus targeted drug delivery provides several opportunities for the treatment of fatal diseases such as cancer. However, the complex nucleocytoplasmic barriers pose significant challenges for delivering a drug directly and efficiently into the nucleus. Aptamers representing singlestranded DNA and RNA qualify as next-generation highly advanced and personalized medicinal agents that successfully inhibit the expression of certain proteins; possess extraordinary gene-expression for manoeuvring the diseased cell's fate with negligible toxicity. In addition, the precisely directed aptamers to the site of action present a tremendous potential to reach the nucleus by escaping the ensuing barriers to exhibit a better drug activity and gene expression. Objective: This review epigrammatically highlights the significance of targeted drug delivery and presents a comprehensive description of the principal barriers faced by the nucleus targeted drug delivery paradigm and ensuing complexities thereof. Eventually, the progress of nucleus targeting with nucleic acid aptamers and success achieved so far have also been reviewed. Methods: Systematic literature search was conducted of research published to date in the field of nucleic acid aptamers. Conclusion: The review specifically points out the contribution of individual aptamers as the nucleustargeting agent rather than aptamers in conjugated form.

Objective: The present study reports the use of MicrofluidizerTM technology to form a stable nanosuspension of atovaquone (ATQ) using quality by design (QbD) approach. Methods: The patient-centric quality target product profile and critical quality attributes (CQAs) were identified. A Box-Behnken design was employed for the optimization of dependent variables, while CQAs like particle size and PDI were evaluated as response variables. Effective optimization of ATQ nanosuspension preparation using Microfluidizer processor as a novel green technology was achieved using QbD approach. Result: The prepared nanosuspension had a mean particle size of 865 nm ± 5%, PDI of 0.261 ± 3%, and zeta potential of -1.79 ± 5 mV. The characterization of the prepared nanosuspension by SEM, DSC, and XRD revealed its nano-crystalline nature whereas FTIR spectroscopic analysis confirmed the absence of any physicochemical interaction because of process parameters between the drug and excipients. Conclusion: In vitro dissolution studies of the nanosuspension using USP-IV exhibited a 100% cumulative drug release over 90 minutes, which is significantly better than that of ATQ pure API. In vivo pharmacokinetic studies revealed bioequivalence of ATQ nanosuspensions by Microfluidizer homogenization process to the marketed formulation1.

Objective: Current study focuses on the formulation and characterization of lipophilic and hydrophilic gel formulations of nifedipine to treat anal fissure via anodermal application. Methods: Lipophilic gels were prepared with Aerosil grades as gelling agents in bulk oils. Polyethylene glycols, hydroxypropyl methylcellulose, and Carbopol® 974P were used as gelling agents in water and propylene glycol for forming hydrophilic gels. The effect of repeated Freeze-Thaw Cycles (FT-C) on microstructures of the gels was investigated by examining viscosity, rheology and textural properties. Aerosil 200 containing lipophilic gels exhibited thixotropic behavior with plastic flow properties and higher viscosities. Result: Accordingly, their compressibility and adhesiveness increased. FT-C caused notable changes in microstructures and textural properties of the lipophilic gels excluding the formulation containing Aerosil 200-in-isopropyl myristate. Among the hydrophilic gels, the viscosity of Carbopol® 974P gels increased depending on the amount of polymer, triethanolamine and water; these gels featured plastic flow without thixotropic behavior. Their compressibility and adhesiveness were higher than other gel formulations with stable post-FT-C characteristics. The higher flux values of nifedipine were observed from water containing Carbopol® 974P gel. Conclusion: The results of the stability tests showed that the Carbopol® 974P gel had a longer shelf life than the Aerosil 200-in-isopropyl myristate gel.

Objective: In vitro diffusion experiments were performed to assess the permeation of magnesium sulfate across pig skin. Methods: The mean thickness of the dermatomed porcine skin was 648 ± 12 μm. Magnesium concentration was measured using inductively coupled plasma-optical emission spectroscopy. Transdermal flux of magnesium sulfate across MN-treated and untreated porcine skin was obtained from the slope of the steady-state linear portion of cumulative amount versus time curve. Results: Statistical analysis of the results was done with Student’s t-test. The transdermal flux of magnesium sulfate across microneedle-treated porcine skin was 134.19 ± 2.4 μg/cm2/h and transdermal flux across untreated porcine skin was 4.64 ± 0.05 μg/cm2/h. Confocal microscopy was used to visualize the microchannels created by a solid microneedle roller (500 μm). Conclusion: From our confocal microscopy studies, it was evident that the 500 μm long microneedles disrupted the stratum corneum and created microchannels measuring 191 ± 37 μm. The increase in transdermal flux across the microneedle-treated skin was statistically significant compared to that of controls, i.e., without the application of microneedles. With the application of microneedles, the transdermal flux of magnesium permeated over 12 h was approximately 33-fold higher in comparison to passive diffusion across an intact stratum corneum.

Background: Realgar, a traditional Chinese medicine, has shown antitumor efficacy in several tumor types. We previously showed that realgar nanoparticles (nano-realgar) had significant antileukemia, anti-lung cancer and anti-liver cancer effects. In addition, the anti-tumor effects of nanorealgar were significantly better than those of ordinary realgar. Objective: To explore the inhibitory effects and molecular mechanisms of nano-realgar on the migration, invasion and metastasis of mouse breast cancer cells. Methods: Wound-healing migration assays and Transwell invasion assays were carried out to determine the effects of nano-realgar on breast cancer cell (4T1) migration and invasion. The expression levels of matrix metalloproteinase (MMP)-2 and -9 were measured by Western blot. A murine breast cancer metastasis model was established, administered nano-realgar for 32 days and monitored for tumor growth and metastasis by an in vivo optical imaging system. Finally, living imaging and hematoxylin and eosin (HE) staining were used to measure the morphology and pathology of lung and liver cancer cell metastases, respectively. Angiogenesis was assessed by CD34 immunohistochemistry. Results: Nano-realgar significantly inhibited the migration and invasion of breast cancer 4T1 cells and the expression of MMP-2 and -9. Meanwhile, nano-realgar effectively suppressed the abilities of tumor growth, metastasis and angiogenesis in the murine breast cancer metastasis model in a time- and dosedependent manner. Conclusion: Nano-realgar significantly inhibited migration and invasion of mouse breast cancer cells in vitro as well as pulmonary and hepatic metastasis in vivo, which may be closely correlated with the downexpression of MMP-2 and -9 and suppression of tumor neovascularization.

Objective: Paeonol is a phenolic compounce that is volatile. In order to decrease its volatility and achieve controlled release, paeonol-loaded liposome in carbomer hydrogel was prepared by coating with soybean phospholipid via ethanol injection method and then added into the carbomer hydrogel. Methods: The quality of paeonol-loaded liposome in carbomer hydrogel was evaluated by the degree of roundness, particle size distribution, zeta potential, entrapment efficiency (filtration method and chitosan neutralization method), viscosity, infrared spectrum, etc. Furthermore, the diffusion from paeonolloaded liposome in hydrogel was studied in vitro. Results: The results showed that the average particle size of paeonol-loaded liposome was about 401 nm, the potential was -17.8 mV, and the entrapment efficiency was above 45%. The viscosity of paeonol- loaded liposome in hydrogel was 23.972x10-3 Pa*s, and the diffusion rate from paeonol-loaded liposome in hydrogel in vitro was obviously slower than that from the other paeonol preparations. Conclusion: The conclusions could be drawn that paeonol-loaded liposome in hydrogel was a kind of novel preparation, and its diffusion in vitro had obvious controlled-release characteristics, which further proved that it might improve the bioavailability of paeonol.

Objective: An injectable long acting In-Situ Forming Gel (ISFG) of human Growth Hormone (hGH) was prepared by using triblock PCL-PEG-PCL (Mw 1500-1500-1500). Ring-Opening Polymerization (ROP) of triblock using microwave was applied. Methods: The BCA protein assay Kit was used to determine the concentration of hGH in the in-vitro release medium. Finally, Sodium Dodecyl Sulfate-Polyacrylamide Gel Electrophoresis (SDS-PAGE) tests and Circular Dichroism (CD) spectrum were done to approve the stability of released hGH. The result of ROP demonstrated that the proportion of PCL to PEG accorded with the initial molar ratio of the monomers. The cross-section of the Surface Electron Microscopy (SEM) indicated the porous framework of the hydrogel could load the drug into its tridimensional matrixes structure. There is the low initial burst release of hGH from the supramolecular hydrogel. Results: The maximum in-vitro release of hGH was 71.2 % ± 1.5 that were due to hGH degrading after this time (21 days). The CD spectrum and SDS-PAGE results confirmed the stability of hGH during invitro release evaluation. Conclusion: The results suggest that the sustained-release formulation using PCL-PEG-PCL can be applied to control the release of hGH.